Broilmaster Gas Grill SKFB2 1 User Manual

St a t io n a r y SiD e Sh e l f Kit  
SKSS2-1  
Dr o p -Do w n Sh e l f  
SKFB2-1  
SKFPB2-1  
re t a in ow n e r S Ma n u a l f o r fu t u r e re f e r e n c e .  
Page 1  
 
St a t io n a r y SiD e Sh e l f in S t a l l a t i o n  
Stainless Steel Side Shelf  
1. Removethecookinggrids, briquetsandbriquetrackfrom  
the grill.  
1
2. Attach the Handle Shelf Bracket to the grill using the Hex  
Head Bolts, Flat Washers, Lock Washers, and Nuts. Do  
not over-tighten.  
2
3. Place the Tool Hook Bar inside the Shelf and place the  
Shelf on the Bracket, aligning the screw hole. Insert the  
Truss Head Screw and tighten. See Figure 1.  
3
Index No.  
Part No. Description  
B076727 SIDE SHELF  
B073971 TOOL HOOK  
1
2
3
B101405 HANDLE SHELF BRACKET  
B100002 HARDWARE PACKAGE  
fig u r e 2  
fig u r e 1  
Dr o p -Do w n SiD e Sh e l f in S t a l l a t i o n  
1
4
Index  
No.  
Part No. Description  
1
2
2
3
3
4
5
B100561 Side Shelf  
B100568 Support Bracket Front - Stainless Steel  
B100559 Support Bracket Front - Black  
B100569 Support Bracket Back - Stainless Steel  
B100560 Support Bracket - Back - Black  
B101370 Bracket Attach Assembly  
B100993 Shelf Support Stiffener  
2
3
5
All repair part orders should be placed through your local Broilmaster® dealer. To locate a dealer in your area, contact  
Broilmaster Customer Service w w w .broilmaster.com. To ensure prompt and accurate service, please provide the following  
information when placing a repair part order: Model Number of your grill, Part Name, Part Number, and Quantity of parts  
needed.  
B101559-3-0611  
Page 3  
 
Dr o p -Do w n SiD e Sh e l f in S t a l l a t i o n  
Solid Surface Drop-Down Side Shelf  
1. Remove the cooking grids, briquets and briquet rack from the grill.  
2. Attach the Bracket Attach Assembly to the grill using the Truss Head Screws, Flat Washers, Lock Washers, and Nuts. See Figure 1.  
Note: Ensure that the Bracket Attach Assembly is installed so that the match light access hole is on the bottom. See Figure 2  
3. Place the Side Shelf upside down on a clean surface and use the four coarse-thread screws to loosely attach the Support Brackets.  
4. Place the support stiffener on the inside of the shelf using (2) #10-16x1/2” screws to secure in place.  
5. Hang the shelf brackets on the lower pins of the Bracket Attach Assembly. Tighten the four screws to secure the bracket arms to the  
shelf. See Figure 3.  
6. To raise the shelf - swing it out and lift the notches over the upper pins. Make sure the shelf is securely in position before placing any-  
thing on it.  
7. To lower the shelf - lift up on both brackets simultaneously and pull out slightly.  
Correct Bracket Alignment  
fig u r e 1  
Incorrect Bracket Alignment  
fig u r e 2  
fig u r e 3  
BROILMASTER®  
A Division of Empire Comfort Systems, Inc.  
918 Freeburg Ave.  
Belleville, Illinois 62220  
Visit o u r w e b s it e a t w w w .broilmaster.com  
If you have a general question about our products, please e-mail us at [email protected].  
Page 4  
B101559-3-0611  
If you have a service or repair question, please contact your dealer.  
 

Blue Rhino Gas Grill GBC730W User Manual
Briggs Stratton Portable Generator 10000 Watt User Manual
Briggs Stratton Refrigerator 030222 User Manual
Brother All in One Printer model 575 User Manual
Brother Printer PT 2300 User Manual
Butler Computer Monitor 645 230 User Manual
Canon Camcorder 2MC User Manual
Carrier Access Network Card 7665 17C User Manual
CBC Camcorder ZN L8210NHA User Manual
Chariot Carriers Baby Carrier Chariot Baby Seat User Manual